It is currently Tue Dec 24, 2024 9:17 am

All times are UTC - 7 hours




Post new topic Reply to topic  [ 15 posts ] 
Author Message
 Post subject: UT2004 load speed
PostPosted: Thu Apr 08, 2004 7:48 pm 
Offline
Site Admin
User avatar

Joined: Mon Jun 17, 2002 8:35 am
Posts: 2733
Location: Houston, Texas
I have a fast PC. Still, it takes forever for UT4 to load and unload. I have 512mb PC2700 ram and an XP 2100 chip. Should starting a game take so long. It takes close to a minute to start a network game. Grrrr. I just started my own tournament on UT 2004 tonight. I have it set to novice and just blew right through the Deathmatch part. I might have died about 5 time total. I'm at the Double Domination stage now and will try to get through it tomorrow. Never payed it before. Later

_________________
~Peace~

Hermskii,


Top
 Profile  
 
 Post subject:
PostPosted: Thu Apr 08, 2004 9:47 pm 
Offline
User avatar

Joined: Fri Oct 17, 2003 7:01 pm
Posts: 501
Location: USA
I have 512 PC3200 400MHz DDR clocked to match, Xp ThroughBreed 2400.....and I was wondering the same thing. I play ArmyOps too, which uses the unreal game engine and has large maps.....it takes a while to load a map as well...about the same amount of time as UT2K4....I am thinking it has to do with the network sync of the client and sever maps...I thought the old unreal only loaded a portion of the maps into memory on client side. Maybe the new one loads the whole map....not sure....but my best guess.

_________________
|3iGi is Godlike!

Puff, Puff, Give


Top
 Profile  
 
 Post subject:
PostPosted: Thu Apr 08, 2004 9:54 pm 
Offline
User avatar

Joined: Mon Jun 17, 2002 12:04 pm
Posts: 2370
Location: Roanoke,VA (USA)
I have xp home( I don't have clue speed chip is unless it speed of coputer that be 2.4 GHz) I know I got 512 DDR ram and it take forever to load too.Could it be Vid Card I got Geforce TI 4200

_________________
" If I had a brain, I'd be dangerous!"


Top
 Profile  
 
 Post subject:
PostPosted: Fri Apr 09, 2004 4:15 am 
Offline
User avatar

Joined: Thu May 15, 2003 3:01 pm
Posts: 1425
Location: North Carolina
I use Cacheman on my main machine to see how much ram I have free. After exiting UT2K4, my 1gig of memory is reduced to 80 free megs. If the program has a memory leak in it, could that be causing the delays?


Top
 Profile  
 
 Post subject: Yep
PostPosted: Fri Apr 09, 2004 3:55 pm 
Offline
Site Admin
User avatar

Joined: Mon Jun 17, 2002 8:35 am
Posts: 2733
Location: Houston, Texas
Sorry to say but I'm glad to hear it's slow for all of you too. I think it's just a major ram hog. I don't think it leaks because after I stop playing my PC is back to normal just like that. XP rules like that. Good answers from all. Thanks!

_________________
~Peace~

Hermskii,


Top
 Profile  
 
 Post subject:
PostPosted: Fri Apr 09, 2004 6:54 pm 
Offline
User avatar

Joined: Wed Sep 04, 2002 6:59 pm
Posts: 1431
Location: In the wind, or wishing I was.....
Would the amount of RAM you've got affect how quickly you can get going on the next map while playing online? I have 1 gig, and I've noticed that I'm always amoung the first to be able to play after a map change. Other players will show up during the first minute of play, but often their bot just stands around unmoving and they show a ping of 999. Finally when the map finishes loading for them they start to move around, and their ping has fallen to a normal level. I've seen people shoot at the bots of the unmoving players, but I don't recall seeing one of these 999 pinged players being killed. Weird eh?

_________________
I'm a man........but I can change........if I have to........I guess


Top
 Profile  
 
 Post subject: I die
PostPosted: Fri Apr 09, 2004 7:42 pm 
Offline
Site Admin
User avatar

Joined: Mon Jun 17, 2002 8:35 am
Posts: 2733
Location: Houston, Texas
I like the invasion game a lot and I am always dead already before I even get in the game. Makes me mad as hell. Yes, I think that ram has everything to do with it. That and high speed connections. I'd get more ram but am playing on a 266 fsb board. I'd rather get a better board and better ram and just transfer the rest of my stuff over to it. That's what I'll do too so it's just a waiting game at this point. I plan to keep this board set up as is for about another year then I'll get one of the 64 bit chips and a board that supports it with all of the ata goodies and USB 2 stuff etc.

_________________
~Peace~

Hermskii,


Top
 Profile  
 
 Post subject:
PostPosted: Fri Apr 09, 2004 8:41 pm 
Offline
User avatar

Joined: Thu May 15, 2003 3:01 pm
Posts: 1425
Location: North Carolina
I have DDR 400, and it still lags for me too, but not as bad as some.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 10, 2004 2:45 am 
Offline
User avatar

Joined: Mon Jun 17, 2002 12:04 pm
Posts: 2370
Location: Roanoke,VA (USA)
U guy think I need other 488 DDR Ram? or add other 512 ram?

_________________
" If I had a brain, I'd be dangerous!"


Top
 Profile  
 
 Post subject: DDR400
PostPosted: Sat Apr 10, 2004 8:10 am 
Offline
Site Admin
User avatar

Joined: Mon Jun 17, 2002 8:35 am
Posts: 2733
Location: Houston, Texas
What is DDR400? Isn't it the same as about PC3200? This is sad. Even simple ram is getting hard to figure out.

_________________
~Peace~

Hermskii,


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 10, 2004 10:55 am 
Offline
User avatar

Joined: Thu May 15, 2003 3:01 pm
Posts: 1425
Location: North Carolina
Herm asked:
Quote:
What is DDR400? Isn't it the same as about PC3200

You got it. 200 double pumped.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 10, 2004 1:18 pm 
Offline
User avatar

Joined: Fri Oct 17, 2003 7:01 pm
Posts: 501
Location: USA
PC 3200 refers to the bandwith, which is 3.2GB/s and that is used calculate the 400 MHz which is refered to as the Speed. They are directly related. PC3500 433MHz and so on.

You should match your MOBO and Processor speed to the 400MHz.

_________________
|3iGi is Godlike!

Puff, Puff, Give


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 12, 2004 5:57 pm 
Offline
User avatar

Joined: Mon Jun 17, 2002 12:04 pm
Posts: 2370
Location: Roanoke,VA (USA)
I adjust setting on screen for UT2k4 to pixel by 1024X768. it help by 30 seconds. Also I found this I can't find on my but it may help u
http://www.ina-community.com/forums/sho ... did=368210

quote:
--------------------------------------------------------------------------------
Originally posted by TooDaMCrazy
would have been easier to just tell us what you changed..oh well...

another thing you could do to cut on load times is in game..

go to settings>game and bottom right uncheck "preload all player skins" and you will see a big diff
--------------------------------------------------------------------------------



I just compared the 2 as I wanted to see what had been changed anyway.

Re the unchecking Preload Skins in the interface - I had done that on my daughters machine. However, comparing her .ini and the posted one, the entries relating to this in her .ini were still set as "True"!

I just started an online game from her machine (After altering her .ini) and the map load times have shortened ... go work that out, strange .... seems like the .ini takes preference over the interface and the interface didnt alter the .ini!

__________________

_________________
" If I had a brain, I'd be dangerous!"


Top
 Profile  
 
 Post subject: Yep
PostPosted: Mon Apr 12, 2004 8:36 pm 
Offline
Site Admin
User avatar

Joined: Mon Jun 17, 2002 8:35 am
Posts: 2733
Location: Houston, Texas
I noticed a big difference in turning off the preload skins options. Thanks! This was a good find.

_________________
~Peace~

Hermskii,


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 13, 2004 12:20 am 
Offline
User avatar

Joined: Mon Jun 17, 2002 12:04 pm
Posts: 2370
Location: Roanoke,VA (USA)
Where is it. I look in USer Int. couldn't find it I change 800x600 to this 1024X768 still kinda slow.But Better even Jarg said I getting in sooner it still take about 30 second to long after black screen with ip address

_________________
" If I had a brain, I'd be dangerous!"


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ] 

All times are UTC - 7 hours


Who is online

Users browsing this forum: No registered users and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Jedi Knights style by HighDefGeek